Machine Wrap Film
ST500™
An amazing new stretch film from ITWSPS,
the world-wide leader in stretch packaging. Now you can
get the high strength and puncture resistance of a blown
film with the silent unwind and clarity of a cast film…the
best of both worlds.
|
- Superior three-layer blown, co-extruded Machine Film.
- Proprietary Metallocene resinformulation, with a true
one-sided cling.
- Formulated to exceed prestretch levels of 250 to 300%
.
- No migrating tackifier which eliminates telescoping and
any cling residue.
- Recommended for B and C type loads.
- Outstanding tear and puncture resistance.
|
 Download
a brochure in PDF format. |
Eliminator™ 
Eliminator is a cast five-layer coextruded
stretch film formulated with metallocene high tech resins
for superior strength, a high level of puncture resistance,
quiet unwind and excellent clarity. Eliminator exhibits
exceptional strength even at stretch levels from 200% to
300%.
Eliminator is a differential cling film
which contains no migrating tackifier thus eliminating
tackifier residue on wrapped products or prestretch rollers.
The high cling inside surface of Eliminator assures that
film tails stay secured to the load while the outside surface
is non-slippery and formulated to perform in a variety
of powered prestretch devices, even those with worn prestretch
rollers.
|
- Advanced Metallocene Resin Formulation
- Superior Load Containment At 250%-300%
Prestretch
- The Best Down-Gauge Film In The Industry
- Lower Cost Per Load For Your Customer
- Clear 5-Layer Cast Film With Exceptional
Performance
- Eliminates Competition!
|
 Download
a brochure in PDF
format. |
ArmorWrap ArmorWrap is the strongest and most abrasion
resistant stretch film on the market today. It was formulated
to provide a thick, strong barrier between the product and
the environment. The film delivers superior protection from
dirt and moisture for products like fiber bales, paper and
carpet rolls, window units and steel coils. ArmorWrap is
performance engineered to be applied with either powered
prestretch or the most basic stretch wrapping equipment.
- Low stretch, high strength film formulated
for surface protection and containment.
- Replaces traditional wrapping methods
to substantially reduce packaging costs.
- High load retention, puncture resistance
and high resistance to abrasion.
Note: Special Order product.
|
UVI Film
Special Ultra-Violet inhibiting additives
protect this stretch film from photo degradation in situations
where wrapped loads are stored outdoors.
- Polyethylene is weakened by prolonged exposure
to UV (sunlight or fluorescent) light. Standard films may
fail within 3 to 6 months with intense exposure.
- Mima blown and cast films are available
with UV inhibitors which stabilize the film and provide
much longer storage life.
- UV film does NOT protect the product from
UV damage, only the film itself.
|
|
 |
|
